01 · Sample first
A white sample before any print
We cut a plain white sample from your dieline on our sample table. You test the fit with your real product before we make a single plate.
Why ours
What our equipment does for your box
02 · Rigid forming
Square corners and tight wraps
Our forming line wraps and presses lid-and-base boxes by machine, then our team fits the inserts by hand. Corners stay square and the wrap stays tight.
03 · In-house finishing
Foil, emboss and spot UV in one building
Lamination, foil stamping, embossing and spot UV run in our print house on the same job as the print, so every finish lines up with the artwork.
Specification
The specs that set your price
Send us these details with your quantity and we price your job within 48 hours.
| Spec | What we run |
|---|---|
| Structure | Outer sleeve plus inner tray; tray slides on a folded rail or a glued shoulder |
| Fit | Sleeve clearance set on the sample, not on a drawing. A tight drawer that swells in humidity jams |
| Pulls | Ribbon pull, die-cut finger notch, or a hang tab on the sleeve |
| Windows | Die-cut window with film patch, or an open-front tray |
| Board | Greyboard 1.2-2.0 mm, or 350-400 gsm folding board for a lighter version |
| Surface | Lamination, spot UV, foil, emboss; soft-touch for dark boxes |
| Insert | Folded paper, EVA or flocked blister inside the tray |
| MOQ | Quoted per structure and finish |
What you get
Built in, not added on
- The product is visible and touchable before the sleeve comes off
- Sleeve keeps the tray closed in transit without tape or a seal
- Ribbon pull or finger notch, selected on the sample
- Works for retail pegboard when the sleeve carries a hang tab
- Inserts hold loose accessories so the tray does not rattle
Questions
Before you order
How tight should the sleeve be?
Tight enough that it does not fall off, loose enough that it does not jam. That is a sampling decision: we cut the white sample, you try it, and the clearance is fixed from there.
Can the tray be glued instead of folded?
Yes. A glued rigid tray holds heavier products and keeps square corners; a folded tray is cheaper and ships flat.
Do you do a window in the sleeve?
Yes, with film patching. Send the artwork with the window position marked.
Related
Often ordered with it
Boxes
Hang-Tab Retail Box
A folding carton with a reinforced hang tab and a self-lock base, printed to read from a metre away on a pegboard.
Boxes
3C & Electronics Box
Boxes for chargers, earbuds, power banks and watches, in lid-and-base, drawer and hang-tab formats.
Boxes
Rigid Gift Box (Lid & Base)
A thick greyboard core wrapped in printed paper.